静态法和动态法测量乙醇饱和蒸气压的比较

物质的蒸气压是化学、化工、冶金、医药等领域的重要基础数据。测量饱和蒸气压是大学物理化学实验教学中的一个基础实验,测量方法主要有静态法和动态法,但两种方法的比较尚未见报道。本文通过比较,得出了两种方法的优缺点以及注意事项。     

Modulating ion current rectification generating high energy output in a single glass conical nanopore channel by concentration gradient

Inspired by biological systems that have the inherent skill to generate considerable bioelectricity from the salt content in fluids with highly selective ion channels and pumps on cell membranes,herein,a fully abiotic,single glass conical nanopores energy-harvesting is demonstrated.Ion current rectification(ICR)in negatively charged glass conical nanopores is shown to be controlled by the electrolyte concentration gradient depending on the direction of ion diffusion.The degree of ICR is enhanced with the increasing forward concentration difference.An unusual rectification inversion is observed when the concentration gradient is reversely applied.The maximum power output with the individual nanopore approaches10~4pW.This facile and cost-efficient energy-harvesting system has the potential to power tiny biomedical devices or construct future clean-energy recovery plants.     

Temperature‐Induced Transformation from Large Compound Vesicles to Worm‐like Aggregates by ABC Triblock Copolymer

Two triblock polymers, tetraaniline‐block‐poly(N‐isopropyl acrylamide)‐block‐poly(hydroxyethyl acrylate) (TA‐b‐PNIPAM‐b‐PHEA) and TA‐b‐PHEA‐b‐PNIPAM, were synthesized with unambiguous structure by a two step method. The difference of these two diblock polymers is the connection order of carboxyl group to block, e.g., carboxyl group to PNIPAM block for PNIPAM‐b‐PHEA and to PHEA block for PHEA‐b‐PNIPAM. Secondly, block tetraaniline was linked to the diblock polymer through amidation to yield the corresponding triblock copolymer. Both of them have almost the identical chemical compositions. The only difference is the connection order of each block in the triblock polymers. When they were self‐assembled at 45°C in a suitable solution, both of their aggregates have spherical shape with slight defects on their surface with the average diameter of about 400 nm. However, when their aggregate dispersion was cooled down to 20°C, only TA‐b‐PHEA‐b‐PNIPAM's morphology changed, forming worm‐like aggregates with the diameter of about 100–200 nm transformed from spherical aggregates. Both amphiphilic property and position of each block in this triblock copolymer are very essential for this morphology transformation. Since the worm‐like aggregates presented here by our group have hollow structure inside, its controlled release properties for doxorubicin were evaluated. Drug release experiment indicated that along with the temperature changes, the rearrangement of the intermediate layer structure caused morphology change in aggregate, thus accelerating the speed of drug release.     

An on-line solid phase extraction-liquid chromatography tandem mass spectrometry method for the determination of perfluoroalkyl substances in the Antarctic ice core samples

An on-line solid phase extraction-high performance liquid chromatography-tandemmass spectrometry method for the analysis of perfluoroalkyl substances (PFASs) in water samples was developed. The optimal analytical conditions were obtained through the optimization of the extraction efficiency of online solid phase extraction column, sample loading rate and loading volume, and the concentration of ammonium acetate in mobile phase. Under the optimal condition, the analytical method displayed good linearity (r² > 0.99) for 12 PFASs (C5-C14 perfluoroalkyl carboxylic acids and C6/C8 perfluoroalkyl sulfonic acids) over a concentration range of 0.5-100 ng/L. The limits of quantitation for samples were between 0.025 ng/L and 0.5 ng/L and the relative standard deviations (RSD) of five consecutive analyses were less than 10% for 1 ng/L standard solution. Satisfactory results were obtained using this analytical method for the analysis of perfluoroalkyl substances in Antarctic ice core samples. The recoveries of all perfluoroalkyl substances were in a range of 73%-117% when the sampleswere spiked with standards at the concentrations of 2.5 ng/L and 25 ng/L.     

Determination of three kinds of banned drugs in milk powder by hybrid solid‐phase extraction purification combined with gas chromatography and mass spectrometry

A gradient clean‐up method for the quantification of five kinds of banned drugs (two hormones, two sedatives, and one chloramphenicol) in milk powder was developed. We used the combination of solid‐phase extraction purification with gas chromatography and mass spectrometry. Milk powder was initially hydrolyzed by β‐glucuronidase/arylsulfatase, and then the hydrolyzed solution was concentrated and purified using a C₈ and cation resin solid‐phase extraction column. To isolate hormones and chloramphenicol drugs, products from the previous step were diluted with methanol and further purified using a silica and diatomite solid‐phase extraction column. After derivatization, the drugs were analyzed by gas chromatography with mass spectrometry, and the hydrolyzed solution was diluted with 5% ammoniated methanol to purify sedatives before gas chromatography with mass spectrometry analysis. Results showed that after adding the banned drugs at concentrations of 0.3–10.0 μg/kg, the average recovery range was 78.2–97.3% with relative standard deviations of 5.3–12.5%. The limit of quantification of the banned drugs (S/N ≥ 10) was 0.3–5.0 μg/kg, whereas the limit of detection (S/N ≥ 3) was 0.1–2.0 μg/kg. The solid‐phase extraction gradient purification system was simple, rapid, and accurate, and could satisfy the detection requirements of hormone, sedatives, and chloramphenicol drugs when used together with gas chromatography and mass spectrometry.     

Precision Chain‐Walking Polymerization of trans‐4‐Octene Catalyzed by α‐Diimine Nickel(II) Catalysts Bearing ortho‐sec‐Phenethyl Groups

α‐Diimine nickel complexes bearing bulky ortho‐sec‐phenethyl groups (bis{[N,N′‐(4‐methyl‐2,6‐di‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel ( 1 ), bis{[N,N′‐(4,6‐dimethyl‐2‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel ( 2 ), bis{[N,N′‐(4‐methyl‐2‐sec‐phenethylphenyl)imino]‐1,2‐dimethylethane}dibromonickel ( 3 )) and {bis[N,N′‐(2,4,6‐trimethylphenyl)imino]‐1,2‐dimethylethane}dibromidonickel ( 4 ) are used as a precatalyst for the polymerization of trans‐4‐octene upon activation with modified methylaluminoxane. These catalysts conduct chain‐walking polymerization of trans‐4‐octene to give polymers possessing propyl and butyl branches with high molecular weight and narrow molecular weight distribution. The branching structure depends on the nickel complex as well as the polymerization temperature, and the ratio of propyl branch was increased with increasing the bulkiness of the ligand and decreasing the polymerization temperature. Consequently, the most bulky 1 among the complexes used is found to polymerize trans‐4‐octene with high 1,5‐regioselectivity at −20 °C to give poly(1‐propylpentan‐1,5‐diyl).

     

Understanding the thermal stability of human serum proteins with the related near-infrared spectral variables selected by Monte Carlo-uninformative variable elimination

Understanding the thermal stability of the proteins in human serum is essential since human serum is the important source of pharmaceutical proteins. Near-infrared (NIR) spectroscopy was applied to the investigation of thermal changes in secondary structure and hydration of human serum proteins. However, as a multicomponent system, the overlap of the broad NIR bands makes the structural analysis very difficult directly using the spectra of serum samples. Therefore, continuous wavelet transform (CWT) was used to improve the resolution of NIR spectra, and Monte Carlo-uninformative variable elimination (MC-UVE) method was applied to the selection of the variables associated with the proteins for the structural analysis. The variables (5956, 5867, 5815, 5747, 4525, 4401, 4359 and 4328 cm^-1) related to protein secondary structures and those (7074, 6951, 6827 and 6700 cm^-1) connected with water species were selected. Then, the thermal stability was analyzed through the intensity variations of the selected variables with temperature from 30 ℃ to 80 ℃. It was found that the variation of the spectral variables related to both α-helix and β-sheetchanges apparently around 60 ℃, indicating the beginning of the thermal denaturation and the transition from α-helix to β-sheet. Moreover, an obvious change was found around 60 ℃ for the content of the water specie S₃, i.e., the water cluster containing three hydrogen bonds. The result demonstrates that MC-UVE can identify the protein-related NIR spectral variables, and the water species may be a marker for investigation of the structural change of proteins in biochemical systems.     

Six-step synthesis of Leonurine and toxicity study on zebrafish

Leonurine (1), an important ingredient in leonurus sibiricus L., can be used for some gynecological disease. We have developed a concise and efficient synthetic route of Leonurine, which can be optimized for mass production. Commercially available compound 6 and 2,3-dihydrofuran (7) were used as starting materials. And the toxicity study on zebrafish shows that Leonurine would promote the hatching of zebrafish embryos at low concentration and result in acute death or chronic lethal toxicity at high concentration.     

Thermo-oxidative degradation of Nylon 1010 films: Colorimetric evaluation and its correlation with material properties

The thermo-oxidative aging behaviors of Nylon 1010 films were studied by various analytical methods, such as measuring the chromaticity, relative viscosity, carbonyl index, UV absorbance at 280 nm and elongation at break of the aged films. The thermo-oxidative aging plots of the results obtained via these various methods at different temperatures are subjected to the time-temperature superposition analysis, which are found to be well superposed. The b^* values are used as X axis and the other results, i.e., relative viscosity, carbonyl index, UV absorbance at 280 nm and elongation at break, are used as Y axis, respectively. The relationship between the b^* values and the other results is obtained, from which we can derive the changes of physical and chemical properties at different b^* values. Since the b^* values can be quickly determined by using a portable spectrophotometer, the on-line evaluation of the thermo-oxidative aging of Nylon 1010 can be realized.     

波长校准用低压石英汞灯驱动电源的研制

研制波长校准用低压石英汞灯电源,用于驱动汞灯起辉并维持稳态发光。电路由EMI滤波电路、桥式整流电路、LCC半桥谐振逆变电路、控制电路和保护电路5部分组成。采用系统建模与仿真验证电路的可行性并计算电路参数理论值,利用示波器和功率表验证电源输出参数,功率输出稳定性不大于0.03 W。根据紫外可见近红外分光光度计国防最高计量标准对研制的电源驱动汞灯的工作效果进行评价。结果表明,汞灯能够输出系列特征谱线,谱线相对强度稳定性不大于5.16%;汞灯工作3 h后,灯管外壳表面温度为43℃。该驱动电源的性能参数满足JJG112–2015《低压石英汞灯波长标准器检定规程》的要求。